"Pure X" Racing Quadcopter Build - Part 1 - Electronics Layout

6,122 Views · Posted 8 years ago

If you are planning to build a "Pure X" quadcopter like a Krieger, Mitsuko, Mixuko, or QQ190, the hardest part is getting all the electronics to fit. This video series will show you how to build an electronics module that will easily install into this type of frame.

In this video, I choose electronics and plan the electrical connections between them. Planning like this is essential since we are going to direct-solder the connections, and mistakes will be costly.

The X4R-SB and Mixuko links below are affiliate links. If you buy anything at all from Atees after using that link, I will get a small commission. Please consider using the below links for a future purchase, to help support the channel.

FrSky X4R-SB - http://asiate.es/aff?l=114377&i=59783
Shendrones Mixuko - http://asiate.es/aff?l=118678&i=59783

These are not affiliate links, just links to good products that I think are worth using.

RedRotor RROSD - http://www.redrotorrc.com/index.php?route=product/product&product_id=115
TS5823 - http://www.myrcmart.com/rcx-ts5823-58ghz-32ch-mini-fpv-video-transmitter-200mw-7g-p-8507.html
HS1177 Camera - http://www.surveilzone.com/DC5V-plastic-case-mini-sony-super-had-ccd-600tvl-super-camera-2.8mm-lens-for-fpv
Xracer F303 - http://www.fpvmodel.com/x-racer-f303-flight-controller-v2_g1106.html

#joshuabardwell, #quadcopter, #racingdrone, #droneracing, #purex, #shendrones, #mitsuko, #mixuko, #krieger, #build, #quadquestions, #qq190falcon, #electronicslayout, #directsolder, #atees, #asiatesscom, #fpvmodel, #xracer, #f303, #hs1177, #ts5823, #myrcmart, #myrcmartcom, #quadcopterbuild, #racingquadcopterbuild, #qq190, #redrotor, #rrosd, #howto, #frskyx4rsb

Posted By