I hope you enjoy this review and check out the Cloud Raptor on
vigorskyrc.com, and everything else they have to offer!
Follow Me:
Instagram: @aero_linc
Also check out the Rutgers University Drone Racing Team @rufpv
Big thanks to my sponsors, Tattu and Fatshark, for keeping me in the air!
MY GEAR:
Florotors Roosh 5x
Emax Redbottom 2205 2600kv
Tattu 30A Dshot ESC
Betaflight F3
TBS Unify Pro Race HV
FRSKY Taranis 9x (butter mode activated)
Fatshark Dominator HD3 w/ Laforge v2 diversity
Cloud Raptor FPV Setup:
HS1177 fpv cam
AKK switchable vtx
Cloud Raptor Parts list(what comes in the box):
Main body with cargo bay
2 wings
Foam elevons
Wooden side pieces
Winglets
Wood strip for mounting the magnets
Wooden motor mount: Durability will be heavily tested
Wood strip for center box
Wood strip for center box bottom
FC wooden mount
Wood plate for fpv cam mounting
Square CF spar
Elevon linkages
Velcro
Esc/ motor wires
Elevon linkages and control horns
Heat shrink
Push rods
Magnets
2 9g servos
2208 1450kv motor
12amp esc (4S WILL EXCEED 12 AMPS)
8x43 prop
What you can add:
Glue(foam tac, gorilla glue, CA,etc
Packing Tape for lamination
Vtx
Fpv camera
Antenna
PDB
