UGFPV Nirvana/TBS crossfire micro TX on 250mw/ HaloRC Archon 6inch on 4S 95C 1500mah ReadyEdi batteries.
I know you all have a million questions about this radio, and everybody wants answers but the long and short of this is that the firmware for this radio just isn't ready and there is no point in reviewing it until it is, as no doubt everything will change! In the meantime i can say this about the hardware, the gimbals are without a doubt the most precise ive ever flown. The difference in digital end to end vs anything else out there is pretty apparent and because of that the looser feel of these gimbals will really show you every tiny movement of your fingers. For me that needs counteracting with a stiffer gimbal tension to really capitalise on the advantages. The result of this feedback has resulted in a stiffer spring kit will likely be included with the final release versions from UGFPV. Does it work for pinching? Hell yes, and with many ways to find comfort on the sticks. If this manages to deliver what was promised, this will be a great radio, so i hope they manage it. Until i can report back on that, please be patient and hold fire! NJ
UGFPV Nirvana Radio:
http://sh2148.ositracker.com/99113/7585
My Main Freestyle Rig:
Frame: HaloRC Archon 5 and 6 inch:
http://halorc.uk/frames/
flight controller: HGLRC F440 V2 Micro Stack:
https://tinyurl.com/y9mhteyf
Camera: Foxeer arrow:
https://goo.gl/c9ib7r
ESC: Tatoo 4in1 Dshot 1200:
https://goo.gl/fbw4ss
Betaflight 3.5 running loop 32k/16k
Motors: Returner R3 2207/2400KV:
https://goo.gl/QWSQHw
Batteries: Ready Edi 1500mah 95C:
https://goo.gl/iim259 (code NJTech20 for 20% off!)
TBS Crossfire Micro TX and Diamond antenna
TBS Nano RX
Support me through affiliate links if you like, it really helps me out :)
Banggood
https://goo.gl/YQ7RTo
Gearbest:
https://www.gearbest.com/promotion-rc-gadgets-special-743.html?lkid=14887908
Or help me out directly here:
http://patreon.com/njtech
paypal.me/NJTechfpv
