Every Subscriber Counts! Help support this channel and Subscribe Now. Click SHOW MORE to see the links mentioned in this video.
Links mentioned in this Video:
Tomo Quads -
https://tomoquads.miiduu.com/
HGLRC TX 20 V2 -
https://shop.thequadcopterreview.com/tx20-v2
HGLRC Zeus F4 -
https://shop.thequadcopterreview.com/hglrc-zeus
Beta 75x Frame Kit -
https://amzn.to/2R9GpAg
Frsky Xm+ -
https://shop.thequadcopterreview.com/xm-plus
BetaFPV 1103 Brushless Motors -
https://amzn.to/2CkF0ye
Caddx Turtle V2 -
https://shop.thequadcopterreview.com/caddx-turtle-v2
Help support the channel please check out:
FPV Gear -
https://shop.thequadcopterreview.com/FPV-Gear
The Humming Store -
https://amzn.to/2vhBjWs
Get any 3d File you need printed by me -
http://pandemicfpv.com
BetaFPV Store -
https://amzn.to/2M1raqm
If you would like to sponsor a giveaway or would like your product reviewed you can find my contact information and shipping address at:
http://www.thequadcopterreview.com in the right rail.
Social Channels:
https://www.facebook.com/thequadcopterreview
https://www.instagram.com/thequadcopterreview
https://twitter.com/thequadcopterr1
My Flights Only Channel:
https://www.youtube.com/channel/UCl2X-0quPCXr-znKf72lv_g
Today we're taking a look at the Whoopee HD Cinematic micro frame kit by TomoQuads.
Features:
3K Carbon Fiber frame
No Prop view
Supports Rakon Heli 40mm propeller guards or the Beta75x frame guards (not included, purchase separatly)
Uses knurled aluminum standoffs
Top or bottom mounted lipo battery
Tpu camera mount to reduce vibration
Support 16x16 , 20x20 or the diagonally mounted beta75x or mobula stack
25mm stack height to fit most of your components with ease
CF are cut along the weave.
6g. CF only 10g. with hardware
Specification:
1mm 3K carbon fiber bottom plate
1mm 3K carbon fiber top plate
Size: 92mm MTM
Knurled black aluminum 25mm m2 standoffs
Flexible TPU 3D printed parts
Supported FC stack bottom plate : 16x16 , 20x20, 36x36 (needs m2 5mm+- standoffs not included)
Top plate have a 20x20 hole pattern for mounting the Runcam split mini2 or Caddx Turtle
Motor hole dimension: 9mm
Included in the kit:
1pc. CF bottom plate
1pc. CF top plate
3pc. 25mm M2 Knurled aluminum standoffs and screws
3D printed camera mount
3D Printed antenna mount
3D printed battery strap
Prop guards are not included and must be purchased separetly see link below.
Recommended parts:
(Tested)
HGLRC Zeus AIO 20x20 stack or 16x16 stack eg: Super S AIO
1103 10,000KV motors or higher
40mm Beta75x 4bladed props or simila
Runcam Split Mini 2 or Caddx Turtle V2
Runcam TX20U VTX or similar like the HGLRC TX20 V2
Any micro receiver RX or your choice like the Frsky XM+
300~450mah 2S lipo battery
Select Beta75x Kit if you are going to use the Beta75x guards/frame
Select Rakon Kit Style1 or Style2 if you are to use the Rakon Heli 40mm Prop guards for 1103 motors.
Plastic Guards or Aluminum guards
Build Notes:
-Remember that this is not a direct conversion kit for your Beta75x. This frame supports 20x20, 16x16 and 36x36 so you can use a wide variety of stack , use the one you think that would work best for your build. The recommended build is just a guidline.
-Following the recommended build will saves you a lot of headache avoiding the hassle of sourcing for parts thats can be hard to find.
-Keep your build as light as possible by using lighter components .Proper cable management is also very important to save on weight.
-If you are using a 16x16 or whoop fc stack you will need to mount the 20x20 Runcam Split Mini2 or Caddx Turtle on the top plate unless you are building a straight 20x20 stack
-For Beta75x prop guards/frame, you will need to cut them in to 2 or 4 parts using a simple wire cutter (see pic). Make sure you select the Beta75 Kit on checkout.
-For Rakon Heli prop guards you can use either the plastic or the recommended aluminum version. Make sure to select the Rakon kit on checkout
-The Beta75x frame/guards have a smaller M1.6 holes vs M2 on the 1103 motors, slightly widening the holes on the plastic guards will makes motor mounting a breeze. This only applies to the Beta75x guards and not the Rakon guards.
-Remeber this is a cinematic quad meant for smooth slow HD recording , it was never meant to be as fast as your stock 75X or M7 its just not gonna happen as the weight on the HD camera alone is already at 13g. you can however make it more responsive and punchy by downgrading to a cmos non hd camera or even remove the prop guards and without a prop guards you now have more room for a bigger 48mm props!
#cinewhoop #cinedrone #hdwhoop #hdmicro
