Tiny Turtle Whoop Build - with Inductrix FPV Plus Spektrum Transmitter and LED Setup

28,556 Views · Posted 6 years ago

www.tinywhoop.com

Parts List is just below the Table of Contents.

Thanks to Ashton's extensive research, we can now indeed use Meow Mode AKA Turtle Mode on a 6mm Tiny Whoop build! The Whoop can flip itself over! This is a huge advantage at any Tiny Whoop race. Here's Ashton's build, complete with Tiny Whoop LEDs and old-school mulled-mod canopy.

Table of Contents:
Overview of parts at 0:00
Disassembly at 1:35
Pigtail Modification at 3:25
Welder Reinforcement at 4:30
Motor Polarity Switch at 5:55
LED Disassembly at 6:30
Led Installation at 7:12
Camera Pigtail Installation at 8:52
Pigtail Installation at 9:05
FC Installation at 9:50
Flange Screw Installation at 11:38
Motor Installation at 11:46
FPV Plus LED Tail Light at 12:50
Prop Installation at 13:19
VTX/Camera Setup at 13:44
VTX/Camera Installation at 14:31
Canopy Installation at 15:11
Binding at 15:30
Switch/Stick Setup at 15:45
Using Meow Mode at 17:02
Flight Demonstration at 17:46

Here's a List of Parts:

Inductrix FPV Plus BNF:
https://www.tinywhoop.com/collections/quads/products/inductrix-fpv-plus

(Or you could go for the flight controller only - https://www.tinywhoop.com/products/inductrix-fpv-plus-flight-controller)

Ultralight Camera Mount:
https://www.tinywhoop.com/products/fpv-plus-camera-mount

Insane Motors:
https://www.tinywhoop.com/collections/motors/products/mmw-6x15mm-motor-speed-insane-set-of-4

Tiny Whoop LEDs:
https://www.tinywhoop.com/collections/leds/products/tiny-whoop-leds

Original Mullet Mod Canopy:
https://www.tinywhoop.com/collections/canopies/products/hypershift-mullet-mod-canopy

Tiny Whoop 255mah HV Battery
https://www.tinywhoop.com/collections/batteries/products/copy-of-mylipo-255mah-25c-1s-battery-with-pw-connector-for-the-tiny-whoop

CHECK OUT Ashton's excellent youtube channel here:h ttps://www.youtube.com/channel/UClqu_TTxUNuFzrWOG8h5s6g