Pure X Racing Quadcopter Build - Part 3 - FC, receiver, camera and vTX header

4,792 Views · Posted 8 years ago

If you are planning to build a "Pure X" quadcopter like a Krieger, Mitsuko, Mixuko, or QQ190, the hardest part is getting all the electronics to fit. This video series will show you how to build an electronics module that will easily install into this type of frame.

---

The links below are affiliate links. If you buy anything at all from Atees after using that link, I will get a small commission. Please consider using the below links for a future purchase, to help support the channel.

FrSky X4R-SB - http://asiate.es/aff?l=114377&i=59783
Shendrones Mixuko - http://asiate.es/aff?l=118678&i=59783
Littlebee LB20 ESC - http://asiate.es/aff?l=119270&i=59783
Littlebee LB30 ESC - http://asiate.es/aff?l=119271&i=59783

If possible, I would suggest using an F390 ESC instead of the LB20 that I am using. The LB20 Pro or the LB30 are both good choices, as well as the DYS XM20.
---

These are not affiliate links, just links to good products that I think are worth using.

RedRotor RROSD - http://www.redrotorrc.com/index.php?route=product/product&product_id=115
TS5823 - http://www.myrcmart.com/rcx-ts5823-58ghz-32ch-mini-fpv-video-transmitter-200mw-7g-p-8507.html
HS1177 Camera - http://www.surveilzone.com/DC5V-plastic-case-mini-sony-super-had-ccd-600tvl-super-camera-2.8mm-lens-for-fpv
Xracer F303 - http://www.fpvmodel.com/x-racer-f303-flight-controller-v2_g1106.html

#joshuabardwell, #quadcopter, #racingdrone, #purex, #shendrones, #mitsuko, #mixuko, #krieger, #build, #quadquestions, #qq190falcon, #atees, #asiateescom, #fpvmodel, #quadcopterbuild, #howto, #racingquadcopterbuild, #redrotor, #rrosd, #frskyx4rsb, #redrotorrrosd, #shendronesmixuko, #xracerf303, #purexracingquadcopterbuild, #racing, #littlebeelb20esc, #littlebeelb30esc, #f390esc, #dysxm20, #xracingquadcopterbuild, #lb20pro

Posted By