Today we’re going to build an indestructible racing drone… well nearly indestructible! We’ll go through all the hardware needed, and assembly for this drone. This is one of my favorite frames, and I hope you’ll love it just as much as I do. Huge shutout to Thomas at RaGG~e for the patience on the project, and much love to Rotor Riot for the opportunity. Had a lot of fun and put in a lot of effort to make this build video happen :D
Prep Video:
https://www.twitch.tv/videos/230221644
Build Guide:
https://docs.google.com/document/d/1af1CN0QoBrk7UBcqHMjDLg5tlU1bGaOhNT3rJ2mIOSw/edit?usp=sharing
Parts List
4x Motors: HypeTrain 2306-2450kv
https://store.rotorriot.com/hypetrain-freestyle-2306-2450kv-motor/
4x Electronic Speed Controller: Wraith 35amp
https://store.rotorriot.com/airbot-wraith32-35a-esc-with-blheli-32-firmware/
1x Flight Controller & PDB: DYS F4 Pro v2 Flight Controller
https://store.rotorriot.com/dys-f4-pro-v2-flight-controller/
1x Camera: Special Edition RotorRiot RunCam Swift v2
https://store.rotorriot.com/rotor-riot-special-edition-runcam-swift-2/
https://www.runcam.com/download/Swift2_RR_manual.pdf
1x Video Transmitter: Team Black Sheep Unify Pro HV
http://team-blacksheep.com/products/prod:unify_pro_hv
1x Receiver: Crossfire Micro Receiver V2
http://www.team-blacksheep.com/products/prod:crossfire_mrx
1x Transmitter: Crossfire Micro Transmitter
http://team-blacksheep.com/products/prod:crossfire_micro_tx
https://www.team-blacksheep.com/tbs-crossfire-manual.pdf
FC Stack
4x 15mm Flush Bolts
4x Rubber Vibration Dampening Grommets
4x 5mm Nylon Standoffs
4x Rubber Vibration Dampeners
Frame Parts
4x 25mm Metal Standoffs
4x 20mm Flush Bolts
4x 10mm Flush Bolts
4x 5mm Cap Head Bolts
Wire Lengths
Motor Wires 30mm
ESC Wires 100mm (22 Gauge & 18 Gauge Positive & Negative Wires, 1 each color, 2 each gauge, 4 total wires per esc, 16 total- 400mm of each wire needed)
VTX Power 100mm
Extra Bits:
400mm of Red & Black 22 Gauge Wire
400mm of Red & Black 16 Gauge Wire
Tools List
X-Tronic Soldering Station
Rosin Core Solder
2mm & 3mm Hex Driver
Flux
Wire Strippers
Prep Order Overview
Cut the Motor Wires to 30mm in length, exposing the end of the wire- tinning it with your soldering iron.
Cut down the ESC wires 22 Gauge & 18 Gauge Positive & Negative Wires, 1 each color, 2 each gauge, 4 total wires per esc, 16 total- 400mm of each wire needed.
Tin The Electronic Speed Controllers Motor Pads, along with the positive and negative connections- and the positive and ground for the signal wires.
Tin the ESC wires, and solder them to the ESC battery positive and negative pads, along with soldering on the signal and ground wires.
Add solder(Tin) the Flight Controller/PDB pads(need to find receiver and VTX power), esc power positive and ground, along with signal positive and ground.
Full Build Log:
https://docs.google.com/document/d/1af1CN0QoBrk7UBcqHMjDLg5tlU1bGaOhNT3rJ2mIOSw/edit?usp=sharing
Support more content like this- become my Patron on Patreon
https://www.patreon.com/ZoeFPV and together with your support we can create some amazing content together! Posting early content releases along with all new giveaways and raffles!
Check out early premieres on
AirVuz.com/user/ZoeFPV ad free! They help sponsor me & my projects all while helping create one of the best communities for pilots and drone content. Support the ones that support the community! #unitedwedrone
Join the conversation and let's digitally hangout together!
Live on
Twitch.tv/Dronelicious where I get really weird with you...
Chill and chat with me @
http://discord.gg/nRn9gU3
Follow my kwad pron on
http://Instagram.com/zoefpv
Find me on Facebook
http://facebook.com/zoe.stumbaugh
Filmed, Edited, and Produced by Zoe Stumbaugh
