Let's get back to basics! I hope this helps out some of you out there wanting to get into freestyle acro with your miniquads. In this tutorial we look at how to set up for many popular manoeuvres by some of todays top FPV pilots. If you would like to see more basic tutorials like this, please let me know. Have fun and fly safe! NJ ** My setup info below **
DON'T FORGET TO CHECK OUT OTHER TUTORIALS IN THE SERIES HERE:
https://www.youtube.com/playlist?list=PLH1dbgOjAmTFEIcE_0fOlX7lxnTTagj0z
Support me through affiliate links
(this helps me out if you shop via these links!)
Banggood
https://goo.gl/YQ7RTo
Gearbest
http://www.gearbest.com/rc-quadcopters-c_11333/?lkid=10989453
Or help me out directly
http://patreon.com/njtech
Quick note: i should mention, at 4:30 i mention the two higher revving motors are driving the roll around the axis, in fact those would be the opposite side (which the did slightly earlier in the manoeuvre). What you're seeing here is the opposite motors kicking in to regulate that roll rate. It just bugs me when i realised and already uploaded! So i thought i'd mention it :)
Betaflight 2.7.0 (first flight after upgrade, Looking damn good!) on controller RW - Airmode
SPRF3 (4K looptime)
Little Bee 20A - flashed with Multishot@4K (MS 14.5)
EMAX RS 2205 2300kv
QAV-R
4S 1400mah Multistar 65C gold spec
HS1177 FPV camera
GoPro 3 Silver
DAL Prop Q5X4X4 Quadblades
F1PV custom angled QAV-R camera mount.
http://f1pvtech.com
X4RSB
Taranis X9D Plus (speaker upgrade, 6 pos switch upgrade)
Fatshark attitudes + faceplate
Controller Rewrite on 2.7.0
RC rate = 1.0
RC Expo = 0.60
Yaw Expo = 0.20
Rate Pitch and Roll = 0.55
Rate Yaw = 1.3
Super Expo = 40
Deadband =3
Yaw Deadband =10
