► How to update your DVR?
- First make sure that your DVR unit is compatible!
-1. Format a micro SD card using the in-goggle DVR menu
2. Power down your goggles
3. Using your computer, place the supplied C RESFW.BIN file in the
root of the SD card. Ensure that the SD card write is complete
(ideally eject the card cleanly) before removing.
4. Install the SD card into the goggles
5. Power up the goggles, wait for a bunch of flashing.
DO NOT REMOVE THE CARD, OR POWER, WHILE THIS IS
HAPPENING
6. When the flashing stops, and the LED turns off, remove power and wait for about 15 seconds.
7. Power up the goggles, and verify that the DVR still works
Note that the firmware file will be removed during installation, so no need to remove it manually