Exuav Mini F4 Flytower:
http://bit.ly/2hZWAjq
F3 Version:
http://bit.ly/2yTrpcF
Eachine MiniCube:
http://bit.ly/2qU8VJR
HGLRC XJB F428-TX20:
http://bit.ly/2y5QTqy
My FPV GEAR:
Goggles - FatShark HD3 -
http://bit.ly/2eX6izM
RX Module - Furious True-D:
http://bit.ly/2uH4Gzj
Radio - Taranis X9D-
http://bit.ly/2mfFmQn
Battery Charger - ISDT D2:
http://bit.ly/2vcDZoN
Exuav Mini F4 Flytower Omnibus F4 AIO OSD Flight Controller & 20A BL_S ESC & 48CH 25/100/200mW VTX
Description (From Banggood):
Specification:
Item Name: F4 FC & 20A 4 In 1 ESC & 48CH 25/100/200mW VTX Flytower
Model: Mini F4 Flytower
Total Weight: 10g
Installation Height: 20mm
Screws: M2x25mm
Recommended Rack Plate Thickness: Not more than 2-4mm
The first top level: 20A 4 In 1 ESC
Input Voltage: 2-4S Lipo
Continuous Current: 20A
Peak Current: 25A ( 10S)
Firmware Version: BLheli_S 16.6 ( G_H_30/L_H_0)
Support Dshot150/ Dshot300/ Dshot600
Also support Oneshot42/ Oneshot125
BlheliSuit Configurable: YES
PDB: integrated
Battery monitoring: integrated
FC power: integrated
Size: 25x25mm
Mounting Hole: 20x20mm, M2
Weight: 3.3g
The second level: Omnibus F3 Flight Controller
Board firmware version: Betaflight 3.1.7 OMNIBUS
Configure: Betaflight
OSD firmware: Betaflight OSD
MCU: STM32 F405
MPU6000 as Acc & Gryo over SPI Bus
Video Camera Voltage: 5V Only
Size: 25x25mm
Weight: 2.3g
The bottom level: 48CH 25/100/200mW FPV Transmitter
CH: 48CH
VTX Power: Off/ 25/ 100/ 200mW
Input Voltage: 2-6S ( Using VTX layer alone)
Video Camera Voltage: 5V (Using VTX layer alone)
Package Included:
1x F4 Flight COntroller
1x 20A 4 In 1 ESC
1x 48CH 25/100/200mW VTX
1x bag of screws
Music:
PACIFIC SUN by Nicolai Heidlas Music
https://soundcloud.com/nicolai-heidlas
Creative Commons — Attribution 3.0 Unported— CC BY 3.0
http://creativecommons.org/licenses/b...
Music promoted by Audio Library
https://youtu.be/kbqmEJTr3nU
