Eachine Wizard X220S - Maiden Flight & Final Thoughts

3,958 Views · Posted 7 years ago

ARF Version: http://bit.ly/2vFWyif
RTF: http://bit.ly/2tHvvGX
Top Plate: http://bit.ly/2h0POcy
Runcam 3: http://bit.ly/2r45Pm3
Unboxing & Review: https://youtu.be/NkvKW_l_fOM
Betaflight Default Settings Dump File: http://txt.do/dqp4v

♫Music By♫
●A-GON - Recollection
●Song/Free Download - https://youtu.be/Oflzu_sgYrw
●Follow A-GON - https://soundcloud.com/dj-a-gon

Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 2206 2300KV 800TVL CCD ARF

Description:

Eachine Wizard X220S:
Wheelbase: 220mm
Frame arm: 4mm light material
Weigh: 356g (without battery and camera mount)
Take off weigh: 561g
Use light composite material.
4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session.
Anti-vibration sponges to protect the racer frome crashing.

Eachine MN2206 2300KV motor
KV: 2300
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 3MM
Propeller: 5 inch
Weight: 28g

Eachine 30A BLHELI_S 4 in 1 ESC

Con. current: 30A
Peak current (10S): 35A
Input voltage: 2-5S
BEC: 5V output
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM

Eachine 1179 800TVL CCD camera

Color: purple
Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980H×1080 (2MP)
Format: PAL
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
AWB: ON/OFF
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lens
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20℃--60℃
Humidity: 0%~98%
Strong backlighting effect

5.8G 72CH 25MW 200mw 600MW
switchable transmitter

Video Format : NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85℃
Connector: RP-SMA Female
Antenna connector: RP-SMA Male

Omnibus F4 V3 flight controller

Size: 36x36mm
Mount holes: 30.5x30.5mm
STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI.
SBUS/PPM input (Pinheaders)
6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
NO BARO
SPI Sensor MPU6000
Included 128Mbit Flash, please always use BEC for the FC.
Supported by BETAFLIGHT and dRonin

Eachine 5051 3-blade propeller

Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm

his is the ARF version that comes without battery, charger, receiver and remote control.

Package included:
1 x Eachine Wizard X220S frame kit
2 x 2206 2300KV motor CW
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S 4 in 1 ESC
1 x Omnibus F4 V3 flight controller
1 x 1179 800TVL camera
1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 x 30° Camera Mount(For Runcam3/Gopro session)
1 x Pagoda antenna
2 x Battery strap
2 x Wrench

Video Tags

#fpv, #racing, #kremerfpv, #unboxing, #quadcopters, #quadcopter, #drone, #review, #test, #flight, #racer, #eachine, #realacc, #banggood, #gearbest, #quality, #accessories, #wizard, #x220s, #fpvracer, #omnibusf4, #58g72ch, #vtx, #30a, #dshot600, #22062300kv, #800tvlccd, #arf, #rtf

Posted By