Eachine Tyro79 - Part 1 The Build - $79 DIY Kit

2,244 Views · Posted 5 years ago
Every Subscriber Counts! Help support this channel and Subscribe Now. Click SHOW MORE to see the links mentioned in this video.
Links mentioned in this Video:
Tyro79 - https://shop.thequadcopterreview.com/Tyro79
Follow my Facebook Page to see all the deals I find while looking for items to review. - https://www.facebook.com/TopFPVDeals

Help support the channel please check out:
FPV Gear - https://shop.thequadcopterreview.com/FPV-Gear
The Humming Store - https://amzn.to/2vhBjWs
Get any 3d File you need printed by me - http://pandemicfpv.com
BetaFPV Store - https://amzn.to/2M1raqm

If you would like to sponsor a giveaway or would like your product reviewed you can find my contact information and shipping address at: http://www.thequadcopterreview.com in the right rail.

Social Channels:
https://www.facebook.com/TopFPVDeals
https://www.facebook.com/thequadcopterreview
https://www.instagram.com/thequadcopterreview
https://twitter.com/thequadcopterr1

My Flights Only Channel: https://www.youtube.com/channel/UCl2X-0quPCXr-znKf72lv_g

Today we're taking a look at the Eachine Tyro 79. Lets look at the specs.
140mm Racing Frame Kit

Wheel base: 140mm
Frame arm thickness: 3mm
Upper plate thickness: 1mm
Side plate thickness: 1mm
Frame kit material: 3K carbon fiber & CNC 6065 aluminium

1607 2800KV 2-4S Brushless Motor

KV: 2800KV
Lipo cell: 2-4S
Weight: 17.8g (includes wires)
Output shaft length: 14mm
Maximum pull: signal 630g (4S 3030 4-blade propeller)
Maximum power: 350W
Configu-ration: 9N/12P
Mounting holes distance: 12*12mm
Mounting holes: φM2
Bearing: NSK
N52 Strong NdFeB Magnet
Recommend propeller: 3 inch

4 IN 1 20A BLHeli_S ESC

Continuous current: 20A
Peak current: 25A (10S)
BEC output: no
Input voltage: 2-4S
Main control chip: 48mhz EFM8BB2
Firmware upgrade: Supports Dshot600/BLHeli_S/Oneshot125
MOS: 3*3
MOS type: vs3610ae 30v64a

Customized F4 Flight Controller

Main control chip: STM32F411
Sensor: ICM20602 6-axis
Integrated OSD
PPM/DSM/IBUS/UAR share: UART1-RX
Mounting holes distance: 20*20mm
Weight: 24g
PID circulation rate and refresh rate can up to 32kHz
Supports Betaflight/cleanflight/inav firmware

700TVL CMOS Camera

Case size: 19mm*19mm
Weight: 9.5g
Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
Signal system: PAL/NTSC switchable
Resolution ratio(horizontal center): 700TVL
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB
White balance: off
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: inter-sync
Camera lens: standard 2.1mm
Lens operating voltage: DC 5-12V
Working current: 70mA (low power consumption)
Working temperature: -20℃~-60℃
Humidity: 0%~98%

5.8G 40CH 0mW/25mw/100mw/200mw switchable VTX

Supports TBS SmartAudio
Transmitting power: 0mW/25mW/100mW/200mW switchable
Channel: 40CH
Full video format: NTSC/PAL
Input voltage: 7V~24V
Power dissipation: +12V/600MW
Size: 25×20×6mm
Weight: ≤3.2g (except antenna)
With copper pipe mini antenna (ipex antenna)
Make sure the antenna is installed at the output end before powering up to avoid damaging internal components.

3030 4-blade propeller

Material: PC
Mounting hole: 5mm
Center thickness: 6mm
Quantity: 10 pairs
Color: black, red, yellow, green
Weight: 5g a pair
Delivery color randomly (10 pairs of propellers are the same color)

Lipo Battery
Not included
Recommend 2-3S 450-650mah

#EachineTyro79 #Tyro79 #CheapDIY #FPV
Posted By

The Quadcopter Review

199    

Up Next

2:57
Eachine Trashcan Giveaway
12:17
Newbeedrone Haul & Huge Black Friday FPV Giveaway Teaser
4:07
Eachine Trashcan Giveaway Winner