It doesn't add any extra cost to you and will help me to grow my channel and bring you high quality updated content.
Thanks in advance!
Description:
Features:
1x Vanta 2.5 frame kit
1x SI F4 FC / ESC 2-4s 16 x 16mm (4in1 Dshot600) / 25-200mw VTX with Smart Audio setup
4x Avant 1103-7650kv motor
1x Runcam Nano 2 (2.1mm lenses)
1x 3d printed TPU vtx antenna mount
2x 3d printed TPU camera mount
1x Rubycon 16V 100uF capacitor
2x Avant lipo strap
1x Non slip lipo pad
1x HQ65mm prop (4CCW / 4CW)
Tips:
Proper CG is required by moving the lipo fore and back
Props must be inserted all the way down to the top of the motor bell
Set the camera tilt angle by moving the TPU camera mount upward and downward (Up to 55deg)
Insert the props in proper direction as shown in the diagram below
2S setup (450-520mah up to 4.5mins normal)
3S setup (520mah up to 2.5-3mins aggressive)
