It doesn't add any extra cost to you and will help me to grow my channel and bring you high quality updated content.
Thanks in advance!
Description:
This is a complete built model and is designed for 2-3S lipo setup (Not suggested for 4S). Standard PID setting is specifically tuned for 2-3S 450mah/520mah lipo. Each unit is pre-tuned before shipment
Features:
1x Kira 2.5 frame kit (Base plate cut in 45deg)
1x SI F4 FC / ESC 2-4s 16 x 16mm (4in1 Dshot600) / 25-200mw VTX with Smartaudio setup
4x Avant 1103-7650kv motor (Brotherhobby Rebranded)
1x Runcam Nano 2 (2.1mm)
1x 3d printed TPU vtx antenna mount
2x 3d printed TPU camera mount
1x Rubycon 16V 100uF capacitor
2x Avant lipo strap
1x Non slip lipo pad
1x HQ65mm prop (4CCW / 4CW)
Tips:
Lipo should be mounted slightly to the front for proper CG
Insert the prop all the way down to the top of the motor bell
Set more camera tilt angle by moving the TPU camera mount upward and downward (Up to 50deg)
Insert the props in proper direction as shown in the diagram below
2S-3S setup (450-520mah up to 5mins)
Music Used:
Song: MusicbyAden - Your Story
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike - CC BY-SA
Video Link: https://youtu.be/D6dqqPy_gwQ
